Evaluation of Straw Flax Preparation Quality in the Framework of Separate Flax Harvesting Technology

The paper explores the technological aspects and methods involved in the preparation of flax straw within the framework of separate fiber flax harvesting technology. This particular technology allows for the prolonged maturation of seeds in the field. The study demonstrates that during the process of seasoning flax straw in the form of unprocessed stem ribbons, the seeds within the capsules undergo natural drying and ripening. This approach enables a reduction in fuel consumption compared to the traditional scheme while obtaining high-quality fiber and seeds suitable for sowing. (Research purpose) The objective of this study is to assess the quality of raw flax during the stage of straw flax preparation. (Materials and methods) The study investigates the processes and technical units involved in fiber flax harvesting, adhering to regulatory guidelines during the stages of stem pulling, seasoning, turning, picking, and processing are thoroughly examined. (Results and discussion) The research results have revealed the indicators for biological productivity of straw and seeds during the process of straw flax preparation. Under different seeding rates, the yield of straw flax ranges from 23.1 to 24.8 centners per hectare during a 14-day seasoning period and from 20.8 to 22.2 centners per hectare on the 21st day. These findings demonstrate that the average yield under various harvesting conditions is 20-30 centners per hectare. The flaxseed yield, ranging from 2.9 to 4.1 centners per hectare at different maturation periods, can be considered satisfactory. Furthermore, it was observed that the elongation of the flax ribbon increases after turning, compared to its initial state, when the combine speed is 5.3 and 7.8 kilometers per hour, remaining within the acceptable limits. However, at a speed of 9.6 kilometers per hour, there was a violation of agrotechnical requirements. (Conclusions) The separate harvesting of flax has proven to be effective during a three-week period of raw flax seasoning. It is important to note that when turning unprocessed flax ribbons, the working speed should not exceed 9 kilometers per hour.

1. Uschapovsky I. The Russian flax sector: bottlenecks and solutions. Journal of Natural Fibers. 2009. Vol. 6. N1. 108113 (In English).

2. Rostovtsev R.A., Chernikov V.G., Ushchapovskiy I.V., Po­pov R.A. Osnovnye problemy nauchnogo obespecheniya l’novodstva [The main problems of scientific support of flax growing]. Sel’skokhozyaystvennye mashiny i tekhnologii. 2020. Vol. 14. N3. 45-52 (In Russian).

3. Bystrova E.M., Razin S.N., Turygin A.B. Obzor rabot po issledovaniyam sposobov uborki l’na-dolguntsa [Overview of research on the methods of cleaning flax]. Aktual’nye problemy nauki v agropromyshlennom komplekse. Sbornik sta­tey 70-y mezhdunarodnoy nauchno-prakticheskoy konferentsii. Vol. 2. Karavaevo: Kostromskaya GSKHA, 2019. 55-61 (In Russian).

4. Demidov V.P., Golovatyuk V.A., Shchukin S.G. Mekhanizatsiya l’novodstva: uchebnoe posobie [Mechanization of flax growing: textbook]. Novosibirsk: NGAU, 2012. 320 (In Russian).

5. Sizov, I.V., Eliseev Yu.V. Perspektivnye mashiny dlya prigotovleniya l’nyanoy tresty [Promissing machines for preparing flaxseed]. Innovatsionnye tekhnologii v APK regiona: dostizheniya, problemy, perspektivy razvitiya. Sbornik nauchnykh trudov po materialam Natsional’noy nauchno-prakticheskoy konferentsii. Tver’: Tverskaya GSKHA, 2021. 279-282 (In Russian).

6. Sizov, I.V. Perspektivnye mashiny dlya prigotovleniya l’nyanoy tresty [Promising machines for preparing flaxseed]. Agrotekhnika i energoobespechenie. 2017. N3(16). 13-20 (In Russian).

7. Sizov I.V. Osobennosti konstruktsii perspektivnogo oborachivatelya lent l’na [Design features of a promising flax ribbon turner]. Razvitie nauchno-innovatsionnogo potentsiala agrarnogo proizvodstva: problemy, tendentsii, puti reshe­niya. Sbornik nauchnykh trudov po materialam Mezhduna­rodnoy nauchno-prakticheskoy konferentsii. Tver’: Tverskaya GSKHA, 2022. 329-331 (In Russian).

8. Sizov, I.V. Romanenko V.Yu. Puti usovershenstvovaniya konstruktsii oborachivatelya lent l’na [Ways to improve the design of the flax ribbon turner]. Innovatsionnye razrabotki proizvodstva i pererabotki lubyanykh kul’tur. Sbornik materialov Mezhdunarodnoy nauchno-prakticheskoy konfe­ren­tsii. Tver’: Tverskoy gosudarstvennyy universitet, 2016. 199203 (In Russian).

9. Mansapova A.I. Urozhaynost’ i kachestvo l’na-dolguntsa v zavisimosti ot pogody, srokov poseva i uborki [Productivity and quality of fiber flax depending on the weather, sowing and harvesting dates]. Zemledelie. 2016. N8. 29-31 (In Russian).

10. Perspektivy razvitiya razdel’noy uborki l’na [Prospects for the development of separate flax harvesting.]. Nauchno-prakticheskiy tsentr Natsional’noy akademii nauk Belarusi po mekhanizatsii sel’skogo khozyaystva; 2018. (In Russian). [obnovleno 30 aprelya 2018; protsitirovano 18 aprelya 2023]. Dostupno [accessed at]: https://belagromech.by/news/perspektivy-razvitiya-razdelnoj-uborki-lna/?ysclid=lgdju6nl90899442571.

11. Godzhaev Z.D., Shevtsov V.G., Lavrov A.V., Tsench Yu.S., Zubina V.A. Strategiya mashinno-tekhnologicheskoy modernizatsii sel’skogo khozyaystva Rossii do 2030 goda (Prognoz) [Strategy of machine-technological modernization of agriculture in Russia until 2030 (Forecast)]. Tekhnicheskiy servis mashin. 2019. N4(137). 220-229 (In Russian).

12. Lobachevskiy Ya.P., Tsench Yu.S., Beylis V.M. Sozdanie i razvitie sistem mashin i tekhnologiy dlya kompleksnoy mekhanizatsii tekhnologicheskikh protsessov v rastenievodstve [Creation and development of machine systems and technologies for complex mechanization of technological processes in crop production]. Istoriya nauki i tekhniki. 2019. N12. 46-55 (In Russian).

13. Izmaylov A.Yu., Lobachevskiy Ya.P., Beylis V.M., Tsench Yu.S. Innovatsionnaya sistema mashinno-­tekh­no­lo­gicheskogo obespecheniya predpriyatiy agro­pro­myshlennogo kompleksa [Innovative system of machine and technological support of agro-industrial enterprises]. Part. 1. Innovatsionnaya sistema mashinno-tekhnologicheskogo obespecheniya sel’sko­khozyaystvennykh predpriyatiy na dlitel’nuyu perspektivu. Мoscow: 2019. 228 (In Russian).