Development of a Vertical Mashing Machine and Specifying its Main Parameters
https://doi.org/10.22314/2073-7599-2023-17-1-62-69
Abstract
The paper proves the necessity to create new modernized types of fruit and vegetable processing machines. The paper highlights the importance of such machinery versatility, since each individual type of fruit and vegetable has its own physical characteristics, such as solidity, viscosity, moisture content, fibers, seeds, and grains. (Research purpose) To study the zucchini mashing process performed by the developed vertical mashing unit. (Materials and methods) An improved mashing machine design is proposed: a vertical plant with a conical auger inside and a sieve drum. (Results and discussion) Based on the calculations, the following parameters are specified: the body wall thickness, the cell diameter, the cone and conical auger parameters, as well as the machine operating modes. The sieve drum height is set at 0.8 meters, the diameter is 0.4 meters, the distance between the cone top and the drum is 0.15 meters. A conical auger is made for four working turns. (Conclusions) The minimum number of zucchini seeds (100 pieces) is specified for the subsequent selection of the drum cell diameter. The criteria and delimitations for high-quality zucchini mashing were identified. The diameter of the vertical masher cells was set within the range from 0.0071 to 0.0093 meters.
About the Authors
A. V. Bogdanov
South Ural State University (National Research University)
Russian Federation
Russian Federation
Andrey V. Bogdanov - Dr.Sc.(Eng.), professor.
Chelyabinsk
A. V. Gritsenko
South Ural State University (National Research University); South Ural State Agrarian University
Russian Federation
Russian Federation
Alexander V. Gritsenko - Dr.Sc.(Eng.), professor.
Chelyabinsk
M. V. Cheskidov
South Ural State Agrarian University
Russian Federation
Russian Federation
Maksim V. Cheskidov - Ph.D.(Eng.), senior lecturer.
Chelyabinsk
L. A. Shtrikker
South Ural State Agrarian University
Russian Federation
Russian Federation
Lyubov A. Shtrikker – assistant.
Chelyabinsk
References
1. Houska M., da Silva F.V.M. High pressure processing of fruit and vegetable products. 2017. 194 (In English).
2. Mil'chakova A.V. Mazunina N.I., Kokonov S.I. Konservirovanie produktsii rastenievodstva: uchebnoe posobie [Canning crop products: a training manual]. Izhevsk: Izhevskaya GSKHA, 2021. 88 (In Russian).
3. Tokar A., Matenchuk L., Kharchenko Z., et al. Development of reciptures of canned smothies made from zucchini and fruits. Eureka: Life Sciences. 2018. N4. 56-62 (In English).
4. Gurtovoy N.V. Modelirovanie razdeleniya plodoovoshchnogo syr'ya v protirochnoy mashine [Simulation of separating fruit and vegetable raw materials in a triturator]. Izvestiya vuzov. Pishchevaya tekhnologiya. 1999. N1. 52-55 (In Russian).
5. Paramonova V.A., Kudryavtsev V.N. Issledovanie protirochnogo oborudovaniya, ego analiz i otsenka effektivnosti [Research on the triturator, its examination and efficiency assessment]. Nauchnyy zhurnal NIU ITMO. Seriya «Protsessy i apparaty pishchevykh proizvodstv». 2015. N4. 43-53 (In Russian).
6. Nagoev M.M., Shogenov B.V. Razrabotka, izgotovlenie i issledovanie protirochnoy mashiny [Development, manufacture and research of a cleaning machine] Nauka i biznes: puti razvitiya. 2022. N2(128). 51-54 (In Russian).
7. Zakirnichnaya M.M., Rubtsov A.V., Dementev V.A., et al. Stress-strain state assessment capacitive apparatus taking into account impact piping for connectors. Journal of Physics. 2021. N2094. 42033 (In English).
8. Ryadnov A.I., Fedorova O.A., Sharipov R.V., Mamakhay A.K., Semchenko A.V. Konstruktivnye osobennosti ustroystv dlya otsenki usiliya rezaniya korneklubneplodov pri ikh izmel'chenii [Design features of devices for assessing the cutting force of root crops during crushing]. Elektrotekhnologii i elektrooborudovanie v APK. 2022. Vol. 69. N1(46). 38-43 (In Russian).
9. Ryadnov A.I., Fedorova O.A., Mamakhay A.K. Vybor chastnykh pokazateley kompleksnoy otsenki effektivnosti ispol'zovaniya izmel'chitelya korneklubneplodov [Special indicators of integrated efficiency assessment of using the root crops cutter]. Elektrotekhnologii i elektrooborudovanie v APK. 2021. Vol. 68. N4(45). 45-50 (In Russian).
10. Lobachevskiy Ya.P., Tsench Yu.S., Beylis V.M. Sozdanie i razvitie sistem mashin i tekhnologiy dlya kompleksnoy mekhanizatsii tekhnologicheskikh protsessov v rastenievodstve [Creation and development of systems for machines and technologies for the complex mechanization of technological processes in crop production]. Istoriya nauki i tekhniki. 2019. N12. 46-55 (In Russian).
11. Zagoruyko M.V., Vasil'chikov V.V., Mamakhay A.K. Imitatsionnoe modelirovanie parametrov shneka ekstrudera [Simulation of the extruder screw parameters.]. Sel'skokhozyaystvennye mashiny i tekhnologii. 2020. Vol. 14. N4. 71-77 (In Russian).
12. Abiduev Al.A., Abiduev A.A., Radnaev D.N., Dugarov Ts.B. Obosnovanie parametrov tsilindricheskogo yacheistogo separatora [A rationale for cell size choice for trieur cylinder]. Vestnik VSGUTU. 2022. N1(84). 37-41 (In Russian).
13. Zapevalov M.V., Sergeev N.S., Redreev G.V., Kovalenko N.V. Vydelenie dlinnykh primesey iz zernovogo materiala na ploskikh reshetakh [Isolation of long impurities from grain material on flat sieves]. Vestnik Omskogo gosudarstvennogo agrarnogo universiteta. 2022. N1(45). 121-128 (In Russian).
14. Kurochkin A.A., Voronina P.K., Shaburova G.V., Frolov D.I. Ekstrudaty iz rastitel'nogo syr'ya s povyshennym soderzhaniem lipidov i pishchevykh volokon [Extrudates from vegetable raw materials with a high lipid and fiber content]. Tekhnika i tekhnologiya pishchevykh proizvodstv. 2016. N3 (42). 104-111 (In Russian).
15. Chaplygin M.E., Zhalnin E.V. Opredelenie kachestva raboty zernouborochnykh kombaynov [Determining the performance quality of combine harvesters operating]. Sel'skokhozyaystvennye mashiny i tekhnologii. 2019. Vol. 13. N4. 71-76 (In Russian).
16. Ahmed J. Minimal processing and novel technologies applied to vegetables. Handbook of Vegetables and Vegetable Processing: Second Edition. Vol. 1-2. 2018. 317-339 (In English).
17. Bulatov S.Yu., Nechaev V.N., Nizovtsev S.L., et al. Otsenka rabochikh parametrov sterzhnevogo izmel'chitelya pri izmel'chenii vlazhnogo zerna [Evaluation of the operating parameters of the rod shredder during the grinding of wet grain]. Vestnik NGIEI. 2022. N10(137). 48-58 (In Russian).
18. Zhang J., Liu L., Liu H., Shi A., Hu H., Wang Q. Research advances on food extrusion equipment, technology and its mechanism. Nongye Gongcheng Xuebao. Transactions of the Chinese Society of Agricultural Engineering. 2017. Vol. 33. 275-283 (In English).
19. Ganenko S.V., Shtrikker L.A. Issledovanie i obosnovanie geometricheskikh razmerov sitovogo barabana protirochnoy mashiny pri proizvodstve soka iz kabachkov [Research on and rationale for the geometric dimensions of the rubbing machine sieve drum in the production of zucchini juice]. APK Rossii. 2017. Vol. 24. N1. 57-62 (In Russian).
Review
For citations:
Bogdanov A.V., Gritsenko A.V., Cheskidov M.V., Shtrikker L.A. Development of a Vertical Mashing Machine and Specifying its Main Parameters. Agricultural Machinery and Technologies. 2023;17(1):62-69. (In Russ.) https://doi.org/10.22314/2073-7599-2023-17-1-62-69
Views:
315
Email this article 