Determination of the Parameters of Improved Coulter for Introducing Mineral and Organic-And-Mineral Fertilizers

When using the conventional coulters for applying organic-and-mineral fertilizers, reliable technological process cannot be ensured unless a fertilizer funnel is adapted to such fertilizers. (Research purpose) Determination of the parameters of an improved coulter for introducing organic-and-mineral fertilizers. (Materials and methods) The authors conducted theoretical studies using the methods of theoretical and agricultural mechanics, as well as analytic geometry. They also considered the horizontal flow of soil particles under the action of the pointed part of a leg and made diagrams of the progressive speed of a cultivator depending on the cutting-point angle of the coulter leg at friction angles of 25, 30, and 35 degrees. (Results and discussion) An analytical relationship was obtained to determine progressive flowability of organic-and-mineral fertilizers through a coulter funnel. The author also found the cutting-point angle of a coulter leg for introducing fertilizers at a certain depth. In this case they neither stick to the coulter surface nor pack up before entering it. The optimum diameter of the fertilizer funnel was determined as well. (Conclusions) It has been proved that the cutting-point angle of a working tool leg for introducing mineral and organic-and-mineral fertilizers developed according to the research should range from 54 to 66 degrees. The authors have determined that an easy flow of fertilizers can be ensured if the diameter of a fertilizer funnel of a coulter should be not less than 43 millimeters.

1. Қишлоқ хўжалиги экинларини парваришлаш ва маҳсулот етиштириш бўйича намунавий технологик карталар 2011-2015 [Standard technological cards for agricultural crops and crop production 2011-2015]. Tashkent: Hilol Media. 2011. 80 (In Uzbek).

2. Mineev V.G., Dzhumankulov Kh.D. et al. Nauchnye osnovy primeneniya udobreniy v Respublikakh Sredney Azii [Scientific basics of applying fertilizers in the Republics of Central Asia]. Tashkent: Uzbekistan. 1977. 70 (In Russian).

3. Sergienko V.A. Tekhnologicheskie osnovy mekhanizatsii obrabotki pochvy v mezhduryad'yakh khlopchatnika [Technologic grounds for mechanizing soil tillage in cotton inter-row spacing]. Tashkent: Fan. 1978. 112 (In Russian).

4. Vygodskiy M.Ya. Spravochnik po vysshey matematike [Reference book on higher mathematics]. Moscow: Nauka. 1972. 872 (In Russian).

5. Khadzhiev A., Khidirov T., Khamidov Sh. Issledovanie parametrov ustroystva k glubokorykhlitelyu dlya glubokogo shirokopolosnogo vneseniya organo-mineral'nykh udobreniy [Study of the parameters of a subsoil cultivator extension for deep wide-coverage application of organic-and-mineral fertilizers]. Vestnik TashGTU. 2000. N1. 75-77 (In Russian).

6. Simarev Yu. Matematicheskie metody analiza effektivnogo ispol'zovaniya sel'skokhozyaystvennoy tekhniki [Mathematical methods for analyzing the effectiveness of using agricultural machinery]. APK: ekonomika i upravlenie. 1999. N6. 59-64.

7. Mukhammadzhanov M., Suleymanov S. Kornevaya sistema i urozhaynost' khlopchatnika [Root system and yield of cotton]. Tashkent: Uzbekistan. 1978. 36-53 (In Russian).

8. Khadzhiev A. Mekhanizatsiya lokal'nogo vneseniya mineral'nykh udobreniy pod khlopchatnik [Mechanization of the local application of mineral fertilizers for cotton]. Tashkent: Mekhnat. 1988. 187 (In Russian).

9. Khadzhiev A., Komilov N. Obosnovanie mesta raspolozheniya nizhney i verkhney kromok vysevnogo okna ustroystva dlya narezki grebney s odnovremennym vneseniyem organo-mineral'nykh udobreniy [Determining the location of lower and upper edges of a seed opening in a device for cutting ridges with simultaneous introduction of organic-and-mineral fertilizers]. Traktory i sel'skokhozyaystvennye mashiny. 2015. N9. 32-33 (In Russian).

10. Sokolov F.A. Agronomicheskie osnovy kompleksnoy mekhanizatsii khlopkovodstva [Agronomical foundations of complex mechanization of cotton growing]. Tashkent: Fan.1977. 171173 (In Russian).

11. Nesmiyan A.Yu., Tsench Yu.S. Tendentsii i perspektivy razvitiya otechestvennoy tekhniki dlya poseva zernovykh kul'tur [Trends and prospects of development of domestic equipment for sowing crops]. Sel'skokhozyaystvennye mashiny i tekhnologii. 2018. Vol. 12. N3. 45-52 (In Russian).

12. Mazitov N.K., Shogenov Yu.Kh., Tsench Yu.S. Sel'skokhozyaystvennaya tekhnika: resheniya i perspektivy [Agricultural machinery: solutions and prospects]. Vestnik VIESH. 2018. N3(32). 94-100 (In Russian).