Design and Experimental Study on Seed Metering Device of Peanut Plot Seeder
https://doi.org/10.22314/2073-7599-2019-13-4-38-41
Abstract
The seed metering device is the key working part of the peanut planter and is placed above the bottom of the seed box or above the opener. The essence of the seed metering process is the eff ect of the seed meter on the seed, converting the seed from the population into an individual, and converting it into a uniform seed stream or a continuous single seed. The seeding method and quality of the seeding machine depend mainly on the seed metering device. Aiming at the shortage of re-broadcasting rate and missed-out rate during sowing, the diff erent parameters of the air-suction metering device were analyzed, and the seeding performance of the seeding device was tested to obtain the primary and secondary factors aff ecting the performance of the seeding device, and the quality of seeding was improved.
About the Authors
Wang Dongwei
College of Mechanical and Electrical Engineering, Qingdao Agricultural University
China
professor
China
professor
Wang Jiasheng
College of Mechanical and Electrical Engineering, Qingdao Agricultural University
China
China
Shang Shuqi
College of Mechanical and Electrical Engineering, Qingdao Agricultural University
China
professor
China
professor
References
1. Rongdong Zh. The development of peanut harvesting machinery is imminent. Agricultural Machinery. 2004. 9(4). 4-5 (In English).
2. Yuhua W. Research on the Development Strategy of Agricultural Mechanization in China. Beijing: China Agricultural Press. 2008. 126-131 (In English).
3. Xiumei J. Design of 2BHQ-2 Air-suction Peanut Precision Planter.农业机械, 2012. 2(8). 97-99 (In Chinese).
4. Xuan L. Design and experiment of the filling type seeding device on the inside of peanut seeder. Transactions of the Chinese Society of Agricultural Engineering. 2014. 10(28). 4751 (In English).
5. China Agricultural Machinery Research Institute. Practical Mechanical Design Manual (I). Beijing: Mechanical Industry Press. 1998 (In English).
6. Boping Zh. Modern Planting Machinery Engineering. Beijing: Mechanical Industry Press, 1997 (In English).
7. Qiang Zh. Agricultural Machinery. Jilin: Chemical Industry Press. 2016 (In English).
Review
For citations:
Dongwei W., Jiasheng W., Shuqi Sh. Design and Experimental Study on Seed Metering Device of Peanut Plot Seeder. Agricultural Machinery and Technologies. 2019;13(4):38-41. (In Russ.) https://doi.org/10.22314/2073-7599-2019-13-4-38-41
Views:
1058
Email this article 