Preview

Agricultural Machinery and Technologies

Advanced search

Development of Algorithms and Software Systems for Motion Control of a Robotic Tillage Unit

https://doi.org/10.22314/2073-7599-2018-12-6-48-52

Abstract

Abstract. Automation of agricultural machinery is aimed at solving specific practical tasks: control and maintenance of the technological process quality, increasing labor productivity as well as crop yields. The method of "precision farming" is economically expedient, since it is a direct saving of technological material, as well as it helps reducing the negative impact on the environment and farm produce. (Research purpose) The research purpose is to review and analyze the main aspects required to develop the algorithms and software for motion control systems for a robotic tillage unit. (Materials and methods) To implement process control, it is necessary to control the direction of travel along a specified path, change the speed of movement depending on the engine load, switching the transmission gears. Physical-and-mechanical characteristics of the unit are rather heterogeneous and depend on weather conditions. Therefore, the algorithm for controlling the power of the robotic mobile unit must take into account, as much as possible, variations in the external effects of drawbar properties and the motion resistance, as a random factor. (Results and discussion) The authors have developed an imitation model representing the movement of a robotic unit. For the simulation, use has been made of a cyclic trajectory of the unit movement, consisting of two types of sections: the rectilinear ones reflecting the soil tillage pattern, and the turn areas where the unit makes a turn along a curvilinear trajectory around a certain center. (Conclusions) The implementation of robotic technologies in agricultural production result in increased technical, technological, production and economic indicators of agricultural units in field work, increased labor productivity, reduced time required for fieldworks, more rational use of bioenergy resources, increased yields of agricultural crops and reduced environmental impacts.

About the Authors

Yakov P. Lobachevsky
Federal Scientific Agroengineering Center VIM, Moscow
Russian Federation
corresponding member of the Russian Academy of Sciences, Dr.Sc.(Eng.), chief researcher


Sergey E. Lonin
Federal Scientific Agroengineering Center VIM, Moscow
Russian Federation
engineer, post-graduate student


Ilya S. Alekseev
Federal Scientific Agroengineering Center VIM, Moscow
Russian Federation
engineer, post-graduate student


Nikolay T. Goncharov
Federal Scientific Agroengineering Center VIM, Moscow
Russian Federation
specialist


Irina I. Afonina
Federal Scientific Agroengineering Center VIM, Moscow
Russian Federation
senior researcher


Ekaterina N. Il'chenko
Federal Scientific Agroengineering Center VIM, Moscow
Russian Federation
engineer


References

1. Izmaylov A.Yu., Khoroshenkov V.K., Luzhnova E.S. Upravlenie sel'skokhozyaystvennymi mobil'nymi agregatami s ispol'zovaniem navigatsionnoy sistemy GLONASS/GPS [Controlling agricultural mobile units with the GLONASS/ GPS navigation system]. Sel'skokhozyaystvennye mashiny i tekhnologii. 2015. N3. 15-20 (In Russian).

2. Sychev V.G., Afanas'ev R.A., Godzhaev Z.A., Grishin A.P., Grishin A.A. Robototekhnika i agrokhimicheskoe obespechenie rastenievodstva [Robotics and agrochemical support of crop production]. Traktory i sel'khozmashiny. 2016. N9. 40-43 (In Russian).

3. Goncharov N.T., Izmaylov A.Yu., Khoroshenkov V.K., Smirnov I.G., Afonina I.I., Luzhnova E.S., Alekseyev I.S., Lonin S.E. Osnovnye napravleniya vnedreniya robotov v sel'skokhozyaystvennoye proizvodstvo Rossii [Main directions of introducing robots into Russian agricultural production]. Avtomatizatsiya v promyshlennosti. 2017. N1. 38-40 (In Russian).

4. Izmaylov A.Yu., Khoroshenkov V.K., Luzhnova E.S., Goncharov N.T., Afonina I.I., Alekseev I.S., Lonin S.E. Avtomatizirovannye sistemy upravleniya dlya optimizatsii raboty MTA [Automated control systems to optimize operation of a machine-tractor unit]. Sel'skiy mekhanizator. 2017. N7. 14-16 (In Russian).

5. Khort D.O., Filippov R.A., Kutyrev A.I. Mnogofunktsional'- noe robototekhnicheskoe sredstvo s sistemoy tekhnicheskogo zreniya [Multifunctional robotic tool with a technical vision system]. Innovatsii v sel'skom khozyaystve. 2015. N4(14). 115-121 (In Russian).

6. Godzhayev Z.A., Grishin A.P., Grishin A.A., Grishin V.A. Klyuchevye tekhnologii i prognoz razvitiya sel'skokhozyaystvennoy robototekhniki [Key technologies and the forecast of agricultural robotics development]. Innovatsii v sel'skom khozyaystve. 2016. N6(21). 35-41 (In Russian).

7. Artyushin A.A., Smirnov I.G. Nauchno-tekhnicheskoe obespechenie primeneniya GLONASS v sel'skokhozyaystvennom proizvodstve [Scientific and technical support of the GLONASS use in agricultural production]. Sel'skokhozyaystvennye mashiny i tekhnologii. 2015. N1. 8-11 (In Russian).

8. Beylis V.M. Obshchie tekhnicheskie i tekhnologicheskie trebovaniya k sisteme innovatsionnykh mashinnykh tekhnologiy i tekhniki [General technical and technological requirements for the system of innovative engineering technology and machinery means]. Traktory i sel'khozmashiny. 2016. N5. 49-52 (In Russian).

9. Grimstad L., Phan H.N.T., Pham C.D., Bjugstad N., From P.J. Initial field-testing of Thorvald, a versatile robotic platform for agricultural applications. Proc of the IROS Workshop on Agri-Food Robotics. 2015. October (In English).

10. Rieder R., Pavan W., Maciel J.M.C., Fernandes J.M.C., Pinho M.S. A virtual reality system to monitor and control diseases in strawberry with drones: A project. Proc 7th Int Cong on Environ Model&Software. 2014. June. 919-926 (In English).


Review

For citations:


Lobachevsky Ya.P., Lonin S.E., Alekseev I.S., Goncharov N.T., Afonina I.I., Il'chenko E.N. Development of Algorithms and Software Systems for Motion Control of a Robotic Tillage Unit. Agricultural Machinery and Technologies. 2019;13(2):48-52. (In Russ.) https://doi.org/10.22314/2073-7599-2018-12-6-48-52

Views: 827


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 2073-7599 (Print)