Theoretical Study of Working Tool Placement in the Combined Unit

Abstract. The author proves that organic fertilizers, unlike the mineral ones, are capable of increasing yields over several years; they do not harm the environment and do not pollute the melon crop fields with nitrates. It has been clarified that their introduction is one of the most effective methods of humus conservation and soil fertility enhancement, which means obtaining fuller yields of high-quality melons and gourds. The NIIMESH researchers have developed a combined unit for local application of organic fertilizers for melons and gourds. (Research purpose) Conducting theoretical studies on the substantiation of the configuration of the working tools of a combined unit for local application of organic fertilizers. (Materials and methods) The author has conducted theoretical studies using methods of analytical geometry and theoretical mechanics. (Results and discussion) Analytical dependences have been obtained to determine transverse distances between furrow shapers used for applying organic fertilizers and making an irrigation groove, as well as longitudinal distances between the tractor's rear wheels and the furrow shapers applying organic fertilizers, between the furrow shapers and the fertilizer spreader, and between the fertilizer spreader and the furrow shaper making an irrigation furrow. (Conclusions) It has been determined that transverse distance between the working tools that make furrows for applying organic fertilizers should range between 0.9 and 1.3 metre, transverse distance between the working tools making an irrigation furrow and a furrow for the application of organic fertilizers is 0.45-0.65 metre. The optimal values of longitudinal distances have been found as well: between the tractor's rear wheels and the working tools making furrows for applying fertilizers – no less than 0.21 metre, between the tip of working tools and the fertilizer spreader – no less than 1.5 metre, and between the fertilizer spreader center and the tip of working tools making an irrigation furrow – at least 0.74 metre.

1. Marchenko N.M., Lichman G.I., Shebalkin A.E. Mekhanizatsiya vneseniya organicheskikh udobreniy [Mechanization of organic fertilizer application]. Moscow: Agropromizdat. 1990. 207 (In Russian).

2. Trapeznikov V.K., Ivanov I.I., Tal'vinskaya N.G. Lokal'noye pitanie rasteniy [Local nutrition of plants]. Ufa: Gilem. 1999. 259 (In Russian).

3. Uteniyazov P. Tekhnologiya lokal'nogo vneseniya organicheskikh udobreniy [Technology of the localization of organic fertilizers]. Agro ilm. 2016. N1(39). 70-71 (In Uzbek).

4. Auyezov O., Uteniyazov P. Ustroystvo dlya podgotovki organicheskikh udobreniy dlya lokal'nogo vneseniya [Device for the preparation of organic fertilizers for local application]. Agro ilm. 2017. N3(47). 31-35 (In Uzbek).

5. Abdurakhmanov A., Uteniyazov P. Ustroystvo dlya lokal'nogo vneseniya organicheskikh udobreniy pod bakhchevye kul'tury [Device for local application of organic fertilizers for melons]. Agro ilm. 2018. N4(54). 84-85 (In Uzbek).

6. Klenin N.I., Sakun V.A. Sel'skokhozyaystvennye i meliorativnye mashiny [Agricultural and land reclamation machines]. Moscow: Kolos. 2005. 671 (In Russian).

7. Mamatov F.M. Sel'skokhozyaystvennye mashiny [Agricultural machines]. Tashkent: Fan. 2007. 339 (In Uzbek).

8. Ibragimov A. Obosnovaniye rasstoyaniya mezhdu rabochimi organami kombinirovannogo agregata dlya ryadovogo seva zernovykh v mezhduryad'ye khlopchatnika [Determining the distance between the working tools of a combined unit for ordinary grain sowing in cotton interrows]. Nauchno-tekhnicheskiy zhurnal FerPI. 2015. N1. 123-124 (In Uzbek).

9. Sergiyenko V.A. Tekhnologicheskie osnovy mekhanizatsii obrabotki pochvy v mezhduryad'yakh khlopchatnika [Technological fundamentals of the mechanization of soil cultivation in cotton inter-rows]. Tashkent: Fan. 1978. 12. (In Uzbek).

10. Tukhtakuziev A., Ibragimov A., Atamkulov A. Issledovanie ravnomernosti glubiny khoda borozdoreza seyalki dlya seva zernovykh v polivnom zemledelii [Study of the furrow depth uniformity of a seed drill used for grain seeding in irrigated agriculture]. Tekhnika v sel'skom khozyaystve. 2014. N5. 2-3 (In Russian).

11. Lobachevskiy Ya.P., El'sheykh A.H. Obosnovanie rastanovki diskovykh rabochikh organov v kombinirovannykh pochvoobrabatyvayushchikh agregatakh [Rationale for the placement of disk working bodies in the combined soilcultivating aggregates]. Sel'skokhozyaystvennye mashiny i tekhnologii. 2009. Vol. 3. N4. 22-25 (In Russian)