Preview

Agricultural Machinery and Technologies

Advanced search

FRACTIONAL TECHNOLOGY AND TOOLS FOR POST-HARVEST GRAIN TREATMENT AND PROCESSING WITH CRUSHING

https://doi.org/10.22314/2073-7599-2018-12-4-16-21

Abstract

The use of fractional technologies for post-harvest treatment and processing of grain heap delivered from field with further special purpose use of grain fractions leads to a significant increase in grain production efficiency. (Research purpose) Developing a fractional technology for post-harvest treatment and processing of grain with crushing and preservation of feed grain fraction and designing a technological line and machines for it. (Materials and methods) The authors have analyzed the technological level and developed a fractional technology for grain post-harvest treatment and processing by crushing with subsequent preservation of the feed grain fraction. They have offered a technological line and presented the design and technological parameters of the corresponding technical means (МЗУ-20Д - grain cleaning universal machine, МПО-30ДФ - preliminary grain cleaning machine with fractionation, ПЗД-3,1, ПЗД-10 – two-stage grain crusher). (Results and discussion) The authors have designed, manufactured and tested a universal grain-cleaning machine МЗУ-20Д. It efficiently cleans grain material coming from the field after its threshing by combine harvesters, and divides it into fractions: seed and feed grain – 60-70 percent, waste material - up to 10 percent, grain fodder - up to 40 percent. Further on, the grain is sent for crushing (for wet grain), followed by preservation and hermetic storage of the products obtained before their feeding to animals. Tests have shown that the developed feed preparation machine efficiently performs the technological process. The authors have developed a two-stage grain crusher (ПЗД-3,1), performing the crushing of grain material in two stages by three rollers, followed by preservation (for wet grain) of the feed grain fraction. (Conclusions) It has been established that the use of the new fractional technology and equipment contributes to an increase in grain cleaning productivity – by 30-40 percent, and the estimated annual economic effect of the renovation  is 400,000 rubles. The estimated annual economic effect of the use of the two-stage grain crusher (ПЗД-3,1) has proved to be more than 60 thousand rubles, and the level of production intensification has increased by 26 percent as compared to the MURSKA crusher produced in Finland.

About the Authors

P A Savinykh
Federal Agricultural Scientific Center of North-East named after N.V. Rudnitskiy (North East FASC)
Russian Federation

Peter A. Savinykh - Dr.Sc.(Eng.), chief research associate.

Kirov.



Yu. V. Sychugov
Federal Agricultural Scientific Center of North-East named after N.V. Rudnitskiy (North East FASC)
Russian Federation

Yury V. Sychugov - Dr.Sc.(Eng.), chief research associate.

Kirov.



V. A. Kazakov
Federal Agricultural Scientific Center of North-East named after N.V. Rudnitskiy (North East FASC)
Russian Federation

Vladimir A. Kazakov - Ph.D.(Eng.), senior research associate.

Kirov.



References

1. Sysuyev V.A., Syrovatka V.I., Popov V.D. et al. Rekomendatsii po zagotovke i ispol’zovaniyu vysokovlazhnogo furazhnogo zerna [Recommendations for obtaining and use of high-moisture feed grain]. M.: Rossel’khozakademiya, 2006. 130. (In Russian).

2. Sysuyev V.A., Rusakov R.V. et al. Sposob podgotovki zerna ozimoy rzhi v kormlenii krupnogo rogatogo skota i ptitsy. Rekomendatsii [A method for preparing winter wheat rye for feeding cattle and poultry. Recommendations]. Kirov: NIISKh Severo-Vostoka, 2012. 31. (In Russian).

3. Sysuyev V.A., Savinykh P.A., Kazakov V.A. Tekhnologiya dvukhstupenchatogo plyushcheniya furazhnogo zerna [Technology of two-stage crushing of feed grain] // Dostizheniya nauki i tekhniki APK. 2012. 6. 70-72. (In Russian).

4. Sychugov N.P., Sychugov Yu.V., Isupov V.I. Mekhanizatsiya posleuborochnoy obrabotki zerna i semyan trav [Mechanization of post-harvest processing of grain and grass seeds]. Kirov: FGUIPP “Vyatka”. 2003. 368. (In Russian).

5. Sysuev V., Semjons I., Savinyh P., Kazakov V. The movement and transformation of grain in a two-stage crusher // In: Engineering for Rural Development, Proceedings. 14. Jelgava. 22-27.

6. Romaliyskiy V.S. Plyushchilka dlya vlazhnogo zerna [Wet grain crusher] // Kombikorma. 2004. N2: 23-25. (In Russian).

7. Sebestuen E.J. Grinding of animal feeding stuffs // Journal of Flaut and Animal Feed Milling. 1974. Mau. 128. (In English)

8. Izmaylov A.Yu. Tekhnologii i tekhnicheskiye resheniya po povysheniyu effektivnosti transportnykh sistem APK [Technologies and technical solutions aimed at improving the efficiency of transport systems used in farm enterprises]. M.: Rosifnormagrotekh. 2007. 197. (In Russian).

9. Izmaylov A.Yu. Povysheniye urovnya ispol’zovaniya transporta v sel’skom khozyaystve [Increasing the level of using transport in agriculture] // Tekhnika v sel’skom khozyaystve. 2006. N2: 8-10. (In Russian)


Review

For citations:


Savinykh P.A., Sychugov Yu.V., Kazakov V.A. FRACTIONAL TECHNOLOGY AND TOOLS FOR POST-HARVEST GRAIN TREATMENT AND PROCESSING WITH CRUSHING. Agricultural Machinery and Technologies. 2018;12(4):16-21. https://doi.org/10.22314/2073-7599-2018-12-4-16-21

Views: 1076


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 2073-7599 (Print)