<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE article PUBLIC "-//NLM//DTD JATS (Z39.96) Journal Publishing DTD v1.3 20210610//EN" "JATS-journalpublishing1-3.dtd">
<article article-type="research-article" dtd-version="1.3" xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xml:lang="ru"><front><journal-meta><journal-id journal-id-type="publisher-id">vimjour</journal-id><journal-title-group><journal-title xml:lang="ru">Сельскохозяйственные машины и технологии</journal-title><trans-title-group xml:lang="en"><trans-title>Agricultural Machinery and Technologies</trans-title></trans-title-group></journal-title-group><issn pub-type="ppub">2073-7599</issn><publisher><publisher-name>Federal State Budgetary Scientific Institution «Federal Scientific Agroengineering Center VIM»</publisher-name></publisher></journal-meta><article-meta><article-id pub-id-type="doi">10.22314/2073-7599-2020-14-2-29-33</article-id><article-id custom-type="elpub" pub-id-type="custom">vimjour-378</article-id><article-categories><subj-group subj-group-type="heading"><subject>Research Article</subject></subj-group><subj-group subj-group-type="section-heading" xml:lang="ru"><subject>ТЕХНИКА ДЛЯ ОБРАБОТКИ ПОЧВЫ</subject></subj-group><subj-group subj-group-type="section-heading" xml:lang="en"><subject>MACHINERY FOR SOIL CULTIVATION</subject></subj-group></article-categories><title-group><article-title>Применение техники и технологии для промывки сильнозасоленных почв</article-title><trans-title-group xml:lang="en"><trans-title>Equipment and Technology Application for Washing Highly Saline Soils</trans-title></trans-title-group></title-group><contrib-group><contrib contrib-type="author" corresp="yes"><name-alternatives><name name-style="eastern" xml:lang="ru"><surname>Жураев</surname><given-names>Ф. У.</given-names></name><name name-style="western" xml:lang="en"><surname>Zhuraev</surname><given-names>F. U.</given-names></name></name-alternatives><bio xml:lang="ru"><p>Фазлиддин Уринович Жураев, доктор технических наук, доцент кафедры</p><p>г. Бухара</p></bio><bio xml:lang="en"><p>Fazliddin U. Zhuraev, Dr.Sc.(Eng.), associate professor of the department</p><p>Bukhara</p></bio><email xlink:type="simple">fjuraev66@mail.ru</email><xref ref-type="aff" rid="aff-1"/></contrib><contrib contrib-type="author" corresp="yes"><name-alternatives><name name-style="eastern" xml:lang="ru"><surname>Мусулманов</surname><given-names>Ф. Ш.</given-names></name><name name-style="western" xml:lang="en"><surname>Musulmanov</surname><given-names>F. Sh.</given-names></name></name-alternatives><bio xml:lang="ru"><p>Фуркат Шодиевич Мусулманов, соискатель</p><p>г. Бухара</p></bio><bio xml:lang="en"><p>Furkat Sh. Musulmanov, applicant</p><p>Bukhara</p></bio><xref ref-type="aff" rid="aff-1"/></contrib></contrib-group><aff-alternatives id="aff-1"><aff xml:lang="ru"><institution>Бухарский филиал Ташкентского института инженеров ирригации и механизации сельского хозяйства</institution><country>Узбекистан</country></aff><aff xml:lang="en"><institution>Bukhara branch of the Tashkent Institute of Irrigation and Agricultural Mechanization Engineers</institution><country>Uzbekistan</country></aff></aff-alternatives><pub-date pub-type="collection"><year>2020</year></pub-date><pub-date pub-type="epub"><day>25</day><month>06</month><year>2020</year></pub-date><volume>14</volume><issue>2</issue><fpage>29</fpage><lpage>33</lpage><permissions><copyright-statement>Copyright &amp;#x00A9; Жураев Ф.У., Мусулманов Ф.Ш., 2020</copyright-statement><copyright-year>2020</copyright-year><copyright-holder xml:lang="ru">Жураев Ф.У., Мусулманов Ф.Ш.</copyright-holder><copyright-holder xml:lang="en">Zhuraev F.U., Musulmanov F.S.</copyright-holder><license xml:lang="ru" license-type="creative-commons-attribution" xlink:href="https://creativecommons.org/licenses/by/4.0/" xlink:type="simple"><license-p>Данная работа распространяется под лицензией Creative Commons Attribution 4.0.</license-p></license><license xml:lang="en" license-type="creative-commons-attribution" xlink:href="https://creativecommons.org/licenses/by/4.0/" xlink:type="simple"><license-p>This work is licensed under a Creative Commons Attribution 4.0 License.</license-p></license></permissions><self-uri xlink:href="https://www.vimsmit.com/jour/article/view/378">https://www.vimsmit.com/jour/article/view/378</self-uri><abstract><p>Восстановить плодородие почв можно с помощью специальных технологий и техники. В частности, для рыхления земель с плотными и загипсованными слоями почвы разрабатывают чизели, а на засоленных землях с высоким уровнем грунтовых вод прокладывают кротовые дрены.</p><p>(Цель исследования) Обосновать параметры и технологии применения энергосберегающих чизельных рабочих органов для рыхления плотных и загипсованных прослоек почвы, а также устройств для формирования кротовых дрен в подпахотных слоях засоленных почв.</p><p>(Материалы и методы) Использовали современные методы и приборы для обоснования параметров чизельного рыхлителя и дренажно-кротового орудия. Представили схему проведения экспериментов на опытно-производственном участке. Изучили механический состав и степень засоленности почвы на опытном поле.</p><p>(Результаты и обсуждение) Определили эффективность рыхления почвы перед промывкой с помощью разработанного чизельного рыхлителя. Для прокладки кротового дренажа на тяжелосуглинистых сильнозасоленных почвах предложили устройство, которое отличается от аналогов тем, что имеет раму из двух частей.</p><p>(Выводы) Обеспечили качественное выполнение технологического процесса для удаление вредных солей из плодородных слоев почвы. Выявили, что разуплотнение почвы чизелем на глубине 0,45 метра, а после вспашки на глубине 0,35 метра с последующей промывкой почвы снижает содержание солей с 0,978 процента до 0,198-0,578 процента, при этом коэффициент рассоления составил 1,7-4,9. Сократили продолжительность промывных поливов на 15 дней по сравнению с традиционной обработкой. Показали, что благодаря дополнительной обработке почвы в случае нехватки воды норму промывки можно уменьшить с 6500 кубометров на гектар до 4500 или 5500 кубометров. Определили, что применение предложенной технологии уменьшает расход энергии на 9,0-14,5 процента, затраты труда на 7,91-14,11 процента, эксплуатационные расходы на 8,16-11,0 процента, увеличивает производительность труда на 16,3-18,0 процента, что обеспечивает годовую экономическую эффективность в размере 11,6-12,6 миллиона сумов.</p></abstract><trans-abstract xml:lang="en"><p>Soil fertility can be restored using special technologies and equipment. In particular, chisels are developed for loosening lands with dense and gypsum soil layers, and mole drains are laid on saline lands with a high level of groundwater.</p><p>(Research purpose) To substantiate the parameters and technologies for using energy-saving chisel working parts for loosening dense and gypsum soil layers, as well as devices for forming mole drains in subsurface layers of saline soils.</p><p>(Materials and methods) Modern methods and devices were used to justify the parameters of the chisel ripper and the mole drainage tools. The authors presented the scheme of experiments at the pilot production area. They studied the mechanical composition and the degree of soil salinity in the experimental field.</p><p>(Results and discussion) The authors determined the soil loosening effectiveness before washing using the developed chisel cultivator. For laying mole drainage on heavily loamy highly saline soils a device was proposed that differs from its analogues in that it has a two-part frame.</p><p>(Conclusions) The authors ensured the high-quality execution of the technological process for the harmful salts removal from the fertile soil layers. It was found that soil decomposition with the chisel at a depth of 0.45 meters, and after plowing at a depth of 0.35 meters followed by soil washing, reduced the salt content from 0.978 percent to 0.198-0.578 percent, at the same time the desalinization coefficient was 1.7-4.9. The duration of irrigation was reduced by 15 days compared to traditional process. The authors showed that due to additional tillage in case of water shortage, the flushing rate could be reduced from 6500 cubic meters per hectare to 4500 or 5500 cubic meters. They determined that the application of the proposed technology reduced energy consumption by 9.0-14.5 percent, labor costs by 7.91-14.11 percent, operating costs by 8.16-11.0 percent, increased labor productivity by 16.3-18.0 percent, and that ensured annual economic efficiency in the amount of 11.6-12.6 million soums.</p></trans-abstract><kwd-group xml:lang="ru"><kwd>мелиорация</kwd><kwd>чизельный рыхлитель</kwd><kwd>рыхление почвы</kwd><kwd>дренажно-кротовое орудие</kwd><kwd>сильнозасоленные почвы</kwd><kwd>промывка засоленных почв</kwd><kwd>тяжелосуглинистые почвы</kwd><kwd>коэффициент рассоления почв</kwd></kwd-group><kwd-group xml:lang="en"><kwd>reclamation</kwd><kwd>chisel cultivator</kwd><kwd>soil loosening</kwd><kwd>drainage and mole implement</kwd><kwd>highly saline soil</kwd><kwd>saline soil leaching</kwd><kwd>heavy loamy soil</kwd><kwd>soil desalinization coefficient</kwd></kwd-group></article-meta></front><back><ref-list><title>References</title><ref id="cit1"><label>1</label><citation-alternatives><mixed-citation xml:lang="ru">Труфанов В.В. Глубокое чизелевание почвы. М.: Агропромиздат. 1989. 142 с.</mixed-citation><mixed-citation xml:lang="en">Trufanov V.V. Glubokoe chizelevanie pochvy [Deep chizelovanie soil]. Moscow: Agropromizdat. 1989. 142 (In Russian).</mixed-citation></citation-alternatives></ref><ref id="cit2"><label>2</label><citation-alternatives><mixed-citation xml:lang="ru">Панков Е.И., Конюшков М.В., Горохова И.Н. О проблеме оценки засоленности почв и методике крупномасштабного цифрового картографирования засоленных почв // Экосистемы: экология и динамика. 2017. N1. С. 26-54.</mixed-citation><mixed-citation xml:lang="en">Pankov E.I., Konyushkov M.V., Gorokhova I.N. O probleme otsenki zasolennosti pochv i metodike krupnomasshtabnogo tsifrovogo kartografirovaniya zasolennykh pochv [About the problem of soils assessing salinity and the large-scale digital mapping methodology of saline soils]. Ekosistemy: ekologiya i dina­mika. 2017. N1. 26-54 (In Russian).</mixed-citation></citation-alternatives></ref><ref id="cit3"><label>3</label><citation-alternatives><mixed-citation xml:lang="ru">Муродов Н.М., Жураев Ф.У. Обоснование параметров орудий для разуплотнения загипсированных почв // Аграрная наука. 2014. N11. С. 30-31.</mixed-citation><mixed-citation xml:lang="en">Murodov N.M., Zhuraev F.U. Obosnovanie parametrov orudiy dlya razuplotneniya zagipsirovannykh pochv [Justification of the parameters of gypsum soils decompression tools]. Agrarnaya nauka. 2014. N11. 30-31 (In Russian).</mixed-citation></citation-alternatives></ref><ref id="cit4"><label>4</label><citation-alternatives><mixed-citation xml:lang="ru">Egidijus K., Rostislav Ch., Miloslav L., Vytenis J. Wear modelling of soil ripper tine in sand and sandy clay by discrete element method. Biosystems Engineering. 2019. Vol. 188. 305-319.</mixed-citation><mixed-citation xml:lang="en">Egidijus K., Rostislav Ch., Miloslav L., Vytenis J. Wear modelling of soil ripper tine in sand and sandy clay by discrete element method. Biosystems Engineering. 2019. Vol. 188. 305-319 (In English).</mixed-citation></citation-alternatives></ref><ref id="cit5"><label>5</label><citation-alternatives><mixed-citation xml:lang="ru">Тухтакузиев А. Обеспечение равномерности глубины обработки почвы // Сельскохозяйственные машины и технологии. 2019. Т. 13. N3. C. 34-38.</mixed-citation><mixed-citation xml:lang="en">Tukhtakuziev A. Obespechenie ravnomernosti glubiny obrabotki pochvy [Ensuring uniformity of soil cultivation depth]. Sel’skokhozyaystvennye mashiny i tekhnologii. 2019. T. 13. N3. 34-38 (In Russian).</mixed-citation></citation-alternatives></ref><ref id="cit6"><label>6</label><citation-alternatives><mixed-citation xml:lang="ru">Лобачевский Я.П., Старовойтов С.И. Оптимальный профиль передней поверхности чизельного рабочего органа // Сельскохозяйственные машины и технологии. 2018. Т. 12. N2. С. 26-30.</mixed-citation><mixed-citation xml:lang="en">Lobachevskiy Ya.P. Starovoytov S.I. Optimal’nyy profil’ peredney poverkhnosti chizel’nogo rabochego organa [Optimal profile of the chisel working body front surface]. Sel’skokhozyaystvennye mashiny i tekhnologii. 2018. T. 12. N2. 26-30 (In Russian).</mixed-citation></citation-alternatives></ref><ref id="cit7"><label>7</label><citation-alternatives><mixed-citation xml:lang="ru">Лобачевский Я.П., Старовойтов С.И. Теоретические и технологические аспекты работы рыхлительного рабочего органа // Сельскохозяйственные машины и технологии. 2016. Т. 10. N5. С. 17-23.</mixed-citation><mixed-citation xml:lang="en">Lobachevskiy Ya.P., Starovoytov S.I. Teoreticheskie i tekhnologicheskie aspekty raboty rykhlitel’nogo rabochego organa [Theoretical and technological aspects of the work of the cultivating working part]. Sel’skokhozyaystvennye mashiny i tekhnologii. 2016. T. 10. N5. 17-23 (In Russian).</mixed-citation></citation-alternatives></ref><ref id="cit8"><label>8</label><citation-alternatives><mixed-citation xml:lang="ru">Хамидов М.Х., Жураев Ф.У. Устройство и принципы работы дренажно-кротового орудия // Irrigatsiya va Mellioratsiya. 2017. N1(7). С. 9-12.</mixed-citation><mixed-citation xml:lang="en">Khamidov M.Kh., Zhuraev F.U. Ustroystvo i printsipy raboty drenazhno-krotovogo  orudiya [The device and operation principles of the drainage-mole gun]. Irrigatsiya va Mellioratsiya. 2017. N1(7). 9-12 (In Russian).</mixed-citation></citation-alternatives></ref><ref id="cit9"><label>9</label><citation-alternatives><mixed-citation xml:lang="ru">Маматов Ф.М., Батиров З.Л., Халилов М.Х., Холияров Е.Б. Трехъярусное внесение удобрений тукопроводом-распределителем глубокорыхлителя // Сельскохозяйственные машины и технологии. 2019. Т. 13. N4. C. 48-53.</mixed-citation><mixed-citation xml:lang="en">Mamatov F.M. Batirov Z.L. Khalilov M.Kh., Kholiyarov E.B. Trekhyarusnoe vnesenie udobreniy tukoprovodom-raspredelitelem glubokorykhlitelya [Three-tier fertilizer application with a fertilizer-distributor subsoiler ]. Sel’skokhozyaystvennye mashiny i tekhnologii. 2019. T. 13. N4. 48-53 (In Russian).</mixed-citation></citation-alternatives></ref><ref id="cit10"><label>10</label><citation-alternatives><mixed-citation xml:lang="ru">Ibrahmi A., Bentaher H., Hbaieb M., Maalej A., Moua­zen A.M. Study the effect of tool geometry and operational condi tions on mouldboard plough forces and energy requirement: Part 1. Finite element simulation. Computers and Electronicsin Agriculture. 2015. 117. 258-267.</mixed-citation><mixed-citation xml:lang="en">Ibrahmi A., Bentaher H., Hbaieb M., Maalej A., Mouazen A.M. Study the effect of tool geometry and operational condi tions on mouldboard plough forces and energy requirement: Part 1. Finite element simulation. Computers and Electronicsin Agriculture. 2015. 117. 258-267 (In English).</mixed-citation></citation-alternatives></ref><ref id="cit11"><label>11</label><citation-alternatives><mixed-citation xml:lang="ru">Isoqova Z.Х. Parameters of artificial pipe forming working apparatus. European science review scientific journal. 2018. N9-10. 181-182.</mixed-citation><mixed-citation xml:lang="en">Isoqova Z.Kh. Parameters of artificial pipe forming working apparatus. European science review scientific journal. 2018. N9-10. 181-182 (In English).</mixed-citation></citation-alternatives></ref></ref-list><fn-group><fn fn-type="conflict"><p>The authors declare that there are no conflicts of interest present.</p></fn></fn-group></back></article>
